Welcome 2017

Last year I made it a goal to get on the water at least once every month of the year. I’m happy to report I kept that New Year’s resolution and hope to hit it again this year. Between kayaking, rowing and sailing it should be an easy goal. I’ve already had the Skerry out this month. It was a beautiful sunny, day with winds blowing 10-15 knots. I had a great sail across Falls Lake, but as I was coming in to shore I let go the tiller stick in order to pull up the dagger board and it slipped over the side. My best guess is that it hit the bottom and the forward momentum of the boat translated that into an upward force and the rudder arm snapped right off. It was made from 2 layers of 1/4″ Okume plywood glued together and then epoxied around the rudder head. It snapped right at the epoxy seam. I’ve decided to replace it with a mortise and tenon solution. My buddy, Matt, gave me a good sized board of white oak 1.25″ thick. I used the old arm as a template and cut out the rough shape on the bandsaw.

wp-1485136611449.jpg

By the way, I love the vise. It’s a WoodRiver universal vise. I bought it over a year ago and finally installed it today. I couldn’t have done what I did without it. It operates in either this position or laid over on it’s side. It swivels until you tighten the work piece and that locks it in place. It’s a great feature for re-positioning angles on the fly.

I’ve never really worked hardwoods like white oak before. I was a little worried about working such a hard wood. To get the bandsaw chatter marks out of the white oak I tried a couple of different tools, but ended up with my Shinto saw rasp from Duckworks. The rough side ate through the oak just fine, the smooth side cleaning up the marks before sanding. It worked great.

The vise did a great job holding the rudder while I cleaned up the broken wood and epoxy.

wp-1485136607664.jpg

Then I took the rudder over to my old drill press and drilled a series of holes to make the mortise. Then back into the vise to clean up with chisels and files.

wp-1485136601967.jpg

The oak arm will head to the table saw next to cut it down from 1.25 to 1″. Then to the bandsaw to taper it from 1″ down to 3/4″ at the end of the arm. Then I’ll probably round over the edges with a router before hand finishing.

 

I also did some work on the trailer this weekend. A neighbor loaned me his welder and I used it to reinforce the bolted on tongue extension I originally added. I also replace the flimsy punched steel winch stand with welded angle iron. It’s much sturdier now. I need the weather to clear up and dry out so I can paint it. Then I’ll add lights back and get the padding finished. It’ll be in fine shape and ready for a good trip down to the coast in the spring.

wp-1485138163033.jpg

(Don’t look too closely at those welds. They are pretty ugly).

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s